Skip to content
Get a Quote
Insight

Where to find measured specific-power data before you buy a compressor

Catalogue efficiency figures are declared by the manufacturer. Measured figures are produced by someone else. The difference matters most at the moment of purchase, when the only number on the table is usually the one the seller wrote.

One independent source is the national recommended catalogue of energy-saving industrial technology and equipment, issued by the Ministry of Industry and Information Technology. The 2022 edition listed 11 categories and 90 energy-saving technologies, plus 8 categories and 133 products, of which 27 compressor models were included with measured efficiency figures.

Why measured specific power is different

Specific power — kW consumed per unit of delivered flow — is the number that determines the annual bill. It is also the number most easily distorted:

  • Rated condition. Flow at a nominal pressure and temperature differs from flow at site conditions. A specific power figure without its reference conditions cannot be compared.
  • Tolerance. Declared figures carry a tolerance band; the catalogue’s measured values do not.
  • Configuration. A machine measured without its dryer and filters is not the same machine that will run in the station.

The catalogue’s figures are useful precisely because they are measured under a defined method by a party with no interest in the sale.

How to use a list like this

  1. Shortlist by measured specific power at your pressure level, not by kW rating. Two machines of the same power can differ by several percent in delivered flow.
  2. Ask the supplier for the test report behind the model, and check that the model number matches — including the pressure variant and the drive type. Catalogue entries are model-specific.
  3. Compare at the operating point you will actually use, not the best point on the curve. For most plants that means somewhere between 60% and 90% load.
  4. Add the station, not just the machine. The catalogue covers compressors; it does not cover the pressure loss between the compressor and your machines, which is frequently larger than the difference between two compressor models.

The limits

A recommended catalogue is a snapshot of a defined procurement cycle. It does not list every efficient machine on the market, and inclusion is not a ranking. Its practical use is as a reference set: a plant that knows the measured specific power of 27 models at its own pressure level can tell whether a quotation is competitive, and can ask a supplier why its figure is not on the list.

That is a modest benefit, but it is the one the buyer controls. The alternative — accepting declared figures at face value — makes the purchase decision on the least verifiable number available.

What to ask for instead, if the catalogue does not cover your model

  • A test report from an accredited laboratory, with the method, the reference conditions and the serial-relevant configuration.
  • Specific power at three loads — full, 75% and 50% — at your discharge pressure.
  • Delivered flow at the same three points, so that the ratio can be checked.
  • The same figures for the treatment equipment, since dryer and filter pressure drop is part of the station’s consumption.

The last item is where quotations usually go quiet. A dryer with 0.3 bar of pressure drop across it costs more energy over a year than most of the differences being argued about between compressors.

—

Data-source note. Catalogue contents as published; SIND products are sold on SIND specifications and are not represented here as catalogue entries.

Planning a compressed-air upgrade? Talk to SIND’s engineers.

Facts as reported by industry press; the project described is not a SIND project.

Planning a compressed air project?

Talk to an engineer
SIND Applications Engineering

The SIND applications engineering team reviews compressed air duty points, sizes systems and writes the technical articles published on this site.

Published November 16, 2026.

SIND
Jafor Nayan Sales Engineer Biruk Argaw Sales Engineer